Facial Recognition Access Control Terminal with Temperature Measurement Add-On Module, Support Mask Detection for Authentication (door won’t open without wearing the mask) or Reminder (only a message to put on a mask), Support Face, Card, Password and QR code Authentication, optional stand (EP-S31-W-NB)
| Operating System | Embedded Linux |
|---|---|
| Camera Element | Dual Lens, 2MP |
| Screen Element | Touch Screen, Size: 7 inch, Resolution: 600×1024 |
| Face Recognition Accuracy Rate | >99% |
| Face Recognition Time | 200ms |
| Face Capacity | 10,000 |
| Card Capacity | 100,000 |
| Storage Capacity | 4GB |
| Event Capacity | (with images), 80,000 |
| Temperature Sensor Type | Thermopile sensor |
| Temperature Measurement Range | 30℃ – 45℃ |
| Temperature Measurement Accuracy | 0.1℃ |
| Temperature Measurement Deviation | ≤±0.3℃ |
| Temperature Measurement Distance | 1-3cm |
| TOF Sensor | Yes (proximity triggered measurement) |
| Protection Module | Yes (thermal sensor protection, measurement reading angle limiting) |
| Authentication Mode | Face Whitelist∶ (1∶ N) Card:(1:N), Face +Body temperature, Mask Detection |
| Door Opening Method | Face, Password, QR code, Card |
| Access Card Type | Mifare Card |
| Wiegand In / Out | 1 / 1 |
| Alarm Input / Output | 2 / 1 |
| Serial Interface | RS485 |
| USB Interface | 1x USB2.0 |
| Lock / Exit | 1 button / 1 button |
| Door contact | 1 |
| Ethernet | 10M/100M Base-TX Ethernet |
| Operating Temperature | Terminal: -20°C ~ 65°C, Module: 15°C ~ 30°C |
| Operating Humidity | Max. 95% RH |
| Dimensions (L x W x H) | 134 × 33 × 305 mm |
| Ingress Protection | (Indoor, No wind) for both terminal and module, IP54 |
| Input Power | 12VDC |
© Copyright 2013 REVO MENA
 OET-213H-BTS1 Spec Sheet 200610-80x120._f2t04eXYICwv.thumb.jpg)
